Как обычно программу можно скачать тут http://code.google.com/p/replicatorg/downloads/list

Напоминаю ReplicatorG можно установить под Windows, Linux и Mac.

Подробнее:

Подробности на английском:

0036 ReplicatorG

* Updated for acceleration behavior

* Updated to have temperature as part of PrintOMatic settings

* Updated for smarter acceleration related configuration

* Added Slic3r and Miracle Grue engines, engine editors, etc

0035-Beta ReplicatorG

* Updated to handle accleration for The Replicator



The Replicator Firmware 5.4:

This new firmware release includes acceleration and updates to

temperature control. Acceleration allows Replicator users to speed up

their prints from the previous 40/55 mm/s default extrusion and travel

speeds to a much snappier 80/150 mm/s. The temperature control changes

will make The Replicator warm up faster. As usual this download is

available from our website and via ReplicatorG's Upload New Firmware

wizard, which you can find in the Machine menu. Thanks to everyone in

the community who helped us out with this -- much of the code for this

update was based on Open Source community effort.

ReplicatorG 0036

ReplicatorG is also updated to handle the wonders of acceleration --

it now includes special accelerated Print-O-Matic defaults. It also

has more robust Gcode handling for T1/T0 toolhead commands, making it

easier to use for other slicers. Speaking of other slicers, RepG 0036

includes Skeinforge 50 as well as 35 and 47, but also has Beta support

for Slic3r 8.3 and the brand new Miracle-Grue slicing engine from

MakerBot. This allows power users some flexibility in testing out

other slicing engines as they tinker and try new projects.

For pre-release downloads, go to

Linux: http://code.google.com/p/replicatorg/downloads/detail?name=replicatorg-0036-linux.tgz&can=2&q=

Mac: http://code.google.com/p/replicatorg/downloads/detail?name=ReplicatorG-0036-Installer.dmg&can=2&q=

Windows: http://code.google.com/p/replicatorg/downloads/detail?name=ReplicatorG-0036-Install.exe&can=2&q=

Firmware: Run ReplicatorG, open the Machine Menu, and select «Upload

new firmware…»

These releases come with a lot of hours of work packed into them.

Thanks to Alison Leonard (MB), Rob Giseburt, Julius ter Pelwijk, Mark

Simpson, Dan Newman, Alessandro Ranellucci, and dozens of other great

contributors to our awesome Open Source codebase.

Overall, this release is acceleration-focused, but has a bunch of new

slicing engine options for the power users. That means there's

something good for everyone to play with when they come inside after a

long summer day.:)

hack on,

— Far McKon

Nerd Herder (aka Software Dept. Director)

MakerBot Industries